Hoses Direct

Flexible Tap Connectors For Plumbing

Hoses Direct supply an endless combination of flexible tap connectors which are also known as tap flexibles. These are available in a variety of ranges from the Standard, WRAS Approved and PEX. Flexible tap connectors are used to connect taps, sinks and bathrooms to the pipework of a building.

Stocked tap connectors are available in a wide variety of sizes and lengths which can withstand working temperatures of up to 70 degrees. For applications where potable water is involved, Hoses Direct supply wras approved tap connectors which offer a smoother EPDM bore to lessen the build up of bacteria and provide cleaner water to drink. Both standard and wras approved flexible tap connectors are composed up of a 304 stainless steel overbraid. These are offered in 8, 10 and 13mm bore sizes with lengths starting at 300mm and going up to 900mm. These are available with the traditional end connections such as threaded and compression fittings, as well as pushfit connections, available in black or grey plastic or brass, which allow reduced installation time and easy disconnection.

Furthermore, in environments such as hospitals where rubber may not be accepted, Hoses Direct offer PEX tap flexibles which come with a wras approval composed of a plastic lining with the same flexibility as standard tap conectors.

Should you require tap connectors which differ from the standard range offered from stock, Hoses Direct can supply custom made tap connectors with bore, end connections and lengths to your specification, email your requirements to [email protected] or view our range by clicking here.