For use on concrete, metal & wood. Single pack, pedestrian grade floor coating. Great gloss appearance. High film build in one coat. Touch dry after 6 hours. Resistant to oil, lubricants & petrol. Easy to apply with brush & roller. 8m2 per litre (two coats recommended). Easy to clean with a neutral cleaner. Important: Not suitable for car traffic or for car park areas.
7100/7100 NS is an easy to apply, solvent based Alkyd floor coating specially designed for applying on old (>2 years), dry concrete for interior and exterior use.
The coating has a good resistance against abrasion and neutral detergents (no alkaline cleaning agents) and is resistant during short contact periods, against lubricating oils, fuel, petrol, etc. 7100 Floor Coating is available in two versions, standard and anti slip NS (with a special synthetic anti-slip additive).
Recommended Uses
- 7100 Floor Coating can be applied on concrete floors older than 2 years, which are completely clean and dry. It is not recommended to apply on smooth/dense concrete or concrete containing a damp repellent additive, which will prevent a good adhesion.
- 7100 Floor Coating can also be applied on old, good-adhering coatings.
- 7100 can be applied onto metal floors which have been correctly prepared and primed with a suitable Rust- Oleum metal primer.
